Mitel 430 - Page 488

Features
488
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
See also:
An installation manual and a configuration manual Mitel OpenCount for MiVoice Office 400 are
available in separate documentation.
Procedures
If a user plugs his chip card in a phone, a login is automatically executed with the help
of the data on the chip card. The user can now make external calls and also receive
external calls on his call number. At the end of the call, the charges are automatically
assigned to his PIN.
For PIN telephony without the use of a chip card, there are different functions for the
user groups patients, staff and projects:
Functions in prefix dialling
Tab. 325 PIN telephony. Functions in prefix dialling
Functions during a call (enquiry call)
Tab. 326 PIN telephony. Functions during a call (enquiry call)
Functions after the conversation
Tab. 327 PIN telephony. Functions after the conversation
Functions in prefix dialling Function code
Make external call as patient *95 3 <PIN> <external call number>
Make external call as a staff member *95 1 <PIN> <external call number>
Make external call for project *95 2 <PIN> <external call number>
Functions during a call (enquiry call) Function code
Update patient's call *959 3 <PIN>
Update staff call *959 1 <PIN>
Update project call *959 2 <PIN>
Functions after the conversation Function code
Update patient's call Not possible
Update staff call Not possible
Update project call *721 <Application ID code> <PIN> #