Switching to the Network Delivery Scanner
Screen
This section explains how to switch the screen to the network delivery scanner screen.
If the E-mail screen or Scan to Folder screen is being displayed, switch to the network delivery scanner
screen.
1. Press [Delivery Dest.].
The network delivery scanner screen appears.
• You cannot switch from the E-mail screen or Scan to Folder screen while destinations or senders
are being specified. To clear a specified destination, display the destination in the destination
field of the E-mail screen or Scan to Folder screen, and then press the [Clear / Stop] key.
Switching to the Network Delivery Scanner Screen
103
To Next Page
Loading...
Need help?
General