2. Base point when placed in the ADF
1. Press [Reduce / Enlarge].
To select a preset ratio on the initial display, press the shortcut reduce/enlarge key.
2. Select a ratio, and then press [OK].
3. Place the originals, and then press the [Start] key.
• You can change reproduction ratios shown on the initial display under Reproduction Ratio in User
Tools. For details about Reproduction Ratio, see “Copier/Document Server Features”, General
Settings Guide.
Zoom
You can specify the reproduction ratio in increments of 1%.
2. Basic Copying
44
To Next Page
Loading...
