4. Enter the number to start counting from with the number keys, and then press [ ].
5. Press [OK] twice.
• To change the value you entered, press [Clear], and then enter a new value.
• You can enter a number between 1 and 9999.
• You can change the settings for Background Numbering under Stamp in User Tools. For details about
Stamp, see “Copier/Document Server Features”, General Settings Guide.
Preset Stamp
Messages are stamped on copies.
• You cannot use the bypass tray with this function.
• Only one message can be stamped at a time.
The following eight messages are available for Preset Stamp:
“COPY”, “URGENT”, “PRIORITY”, “For Your Info.”, “PRELIMINARY”, “For Internal Use Only”,
“CONFIDENTIAL”, “DRAFT”
3. Advanced Copying
102
To Next Page
Loading...
