5. Select the standard message to be stamped, and then press [OK].
The selected standard message is shown above the highlighted [Standard Message].
6. Press [OK] twice.
7. Specify the destination, and then press the [Start] key.
The machine cannot stamp multiple standard messages.
• To print a standard message that is not programmed as a default, program it in advance in “Program /
Change / Delete Standard Message” in the Facsimile Features menu.
• You can program one of the Quick Operation keys with operations for this function. Using the Quick
Operation key allows you to omit steps 2, 3, and 6. For details about Quick Operation Key, see
“Facsimile Features”, General Settings Guide.
Auto Reduce
When this function is turned on, if the receiver's paper is smaller than the size of the original you are sending,
the document is automatically reduced to fit onto the paper available at the other end.
• If you turn this function off, the scale of the original is maintained and some parts of the image may
be deleted when printed at the other end.
Transmission Options
169
To Next Page
Loading...
Need help?
General