Adding Staples
This section describes what to do when staples need replacing.
• Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple
unit. You can trap your fingers if you do not.
• Stapling failures or jams may occur if you use a staple cartridge other than that recommended.
• If you cannot pull out the upper unit, there are staples remaining inside the cartridge. Use all the
staples, and do not add more.
• Refill the stapler according to the finisher type. Check the type if you are unsure. For details about
type of finisher, see “Appendix”, About This Machine.
1000-sheet Finisher
This section describes how to add staples to the 1000-sheet finisher.
To Next Page
Loading...
