Switching to the Scan to Folder Screen
This section explains how to switch to the Scan to Folder screen.
If the E-mail screen is being displayed, press [Folder] to switch to the Scan to Folder screen.
If the network delivery scanner screen is being displayed, switch to the Scan to Folder screen as follows:
1. Press [Delivery Dest.].
The E-mail screen or Scan to Folder screen appears.
2. If the E-mail screen appears, press [Folder].
The Scan to Folder screen appears.
• You cannot switch from the network delivery scanner screen while delivery destinations are being
specified. To clear the specified destination, display the destination in the destination field of the
network delivery scanner screen, and then press the [Clear/Stop] key.
Switching to the Scan to Folder Screen
59
To Next Page
Loading...
