2. Press [Stamp].
3. Press [OK].
• Last pages are stamped even if you selected not to scan the last page.
• Stamping may continue if scanning is interrupted, depending on the cause of interruption.
• Replace the stamp cartridge when stamp begins to fade. For details, see "Replacing the Stamp
Cartridge", Troubleshooting.
Batch, SADF
This section explains settings for scanning multiple originals in several batches.
To scan the originals as a single file, select [Batch].
To scan the originals individually in the ADF, select [SADF].
• If you select [Batch], scanning starts as soon as you place the additional originals and press the [Start]
key. When all the originals have been scanned, press [ ]. If you select [Batch], regardless of the
default settings, the machine waits until additional originals are placed.
• If [SADF] is selected, scanning starts as soon as you place additional originals in the ADF. Select
which operation the machine performs while waiting for additional originals in [Wait Time for Next
Original(s): SADF] under [Scanner Features]. For details about [Wait Time for Next Original(s):
SADF], see "Scanner Features", General Settings Guide.
1. Press [Original Feed Type].
6. Various Scan Settings
136
To Next Page
Loading...
Need help?
General