Copying onto Special Paper
When copying onto special paper such as OHP transparencies, and thick paper, select the type and size
of paper.
• When setting OHP transparencies, thin paper, or adhesive label paper, Staple, Shift, or Sort cannot
be used.
• When copying onto OHP transparencies, remove copied sheets one by one.
1. Open the bypass tray, and then insert the paper face-down until you hear the beep.
2. Align the paper guides to the paper size by pinching the clip.
3. Press [Bypass], and then press the [ ] key.
4. Select the paper type in Special Paper.
5. Specify the paper size, and then press [OK].
6. Place the originals, and then press the [Start] key.
• When copying onto OHP transparencies, use A4 or 8
1
/
2
× 11 size sheets, and specify its size.
• To prevent multiple sheets from being fed at once, fan paper before placing it on the tray.
2. Basic Copying
42
To Next Page
Loading...
