• Selecting [Text], [Text / Line Art], or [Text / Photo] for the scan type causes [Auto Density] to be
selected.
• You can set the density that is selected right after the machine is turned on or whenever the [Clear
Modes] key is pressed. See “Setting Transmission Function Defaults”.
• p.152 "Setting Transmission Function Defaults"
Mixing Scan Settings for a Multiple Page Original
When sending an original of several pages, you can select a different scan setting for each page.
It is recommended that originals be placed on the exposure glass when mixing scan settings for a multiple
page original.
• If you are using the ADF, do not change the “Resolution” setting while originals are being scanned.
When placing originals on the exposure glass
1. Check which pages you want to scan with different settings.
2. Remove the previous page and place the next page that you checked on the exposure glass.
3. Make the scan settings.
You have about 60 seconds (10 seconds for Immediate Transmission) to make the scan settings.
The time remaining is shown on the display.
Scan Settings
71
To Next Page
Loading...
Need help?
General