1. When the Machine Does Not Operate
As Wanted
This chapter describes basic troubleshooting procedures that are applicable to all functions of this machine.
Indicators
This section describes the indicators displayed when the machine requires the user to remove misfed paper,
to add paper or to perform other procedures.
Indicator Status
: Misfeed indicator Appears when a misfeed occurs.
See p.117 "Removing Jammed Paper".
: Load Paper indicator Appears when paper runs out.
See p.97 "Loading Paper".
: Add Toner indicator Appears when toner runs out.
See p.106 "Adding Toner".
: Add Staple indicator Appears when staples run out.
See p.110 "Adding Staples".
: Waste Toner Full indicator Appears when the waste toner bottle is full.
Contact your sales or service representative.
: Empty Hole Punch Receptacle
indicator
Appears when the hole punch receptacle is full.
See p.131 "Removing Punch Waste".
: Service Call indicator Appears when the machine is malfunctioning or requires
maintenance.
: Open Cover indicator Appears when the front cover, etc., is open.
7
To Next Page
Loading...
Need help?
General