• To change the value you specified, readjust it with [ ] and [ ].
Entering the ratio with the number keys
Enter a ratio using the number keys.
1. Press [Reduce / Enlarge].
2. Press [Number keys].
3. Enter the desired ratio with the number keys, and then press [ ].
4. Press [OK] twice.
5. Place the originals, and then press the [Start] key.
• To change the value you entered, press [Clear], and then enter a new value.
Auto Reduce/Enlarge
The machine automatically detects the original size and then selects an appropriate reproduction ratio
based on the paper size you select.
2. Basic Copying
46
To Next Page
Loading...
Need help?
General