7. Press [Exit] twice.
The standby display appears.
• If the size of a received and stored document is larger than A3, the document is displayed in the
preview as a single image, but it will be split and printed over several sheets.
Printing Received and Stored Documents
This section explains how to print documents saved on the hard disk.
1. Press [Change TX / Info].
2. Select [Print / Delete Stored Reception File].
3. Select a file to be printed, and then press [Print].
To cancel printing, press [Cancel].
To delete the document after printing, press [Delete File after Printing].
To perform two-sided printing, press [Print on 2 Sides] before pressing the [Start] key.
4. Press the [Start] key.
To stop printing after pressing the [Start] key, press [Stop Printing]. The display returns to that of step
3.
4. Changing/Confirming Communication Information
244