• In this manual, “IP address” covers both IPv4 and IPv6 environments. Read the instructions that are
relevant to the environment you are using.
Before Use
To use LAN-Fax features, a LAN-Fax Driver must be installed on your computer.
Use the LAN-Fax Driver included on the printer CD-ROM. You must also make the required computer to
fax network settings on the machine, according to the type of connection.
• When a personal computer and the machine are connected in parallel: See “Printing with Parallel
Connection”, Printer Reference and “Connecting the Machine”, General Settings Guide.
• When using Ethernet or wireless LAN, see “Connecting the Machine”, General Settings Guide.
Using the Software
This section provides information about LAN-Fax Driver, Address Book, and LAN-Fax Cover Sheet Editor.
LAN-Fax Driver
This driver allows you to use LAN-Fax functions.
• All operations cannot be guaranteed depending on the system environment.
• You can install the LAN-Fax Driver from the CD-ROM provided with this machine or download it from
the supplier's Web site. If your operating system is Windows 98 / Me or Windows NT 4.0, you must
download the LAN-Fax Driver from the supplier's Web site. Select this machine and the operating
system you are using, and then download it.
Location of the file
The following folder is on the CD-ROM:
• LAN-Fax Driver for Windows 2000/XP/Vista, Windows Server 2003/2003 R2
\DRIVERS\LAN-FAX\XP_VISTA
Operating environment
• Computer
PC/AT compatible
• Operating systems
Microsoft Windows 2000/XP/Vista
Microsoft Windows Server 2003/2003 R2
6. Fax via Computer
278
To Next Page
Loading...
Need help?
General