Input / Output
Item Description
Switch to Batch You can select to have Batch mode or SADF mode displayed when
you press [Special Original].
SADF Auto Reset In SADF mode, an original must be set within a specified time after the
previous original has been fed. You can adjust this time from 3 to 99
seconds in increments of 1 second.
Rotate Sort: Auto Paper
Continue
Specify to continue copying when paper of the required orientation
has run out during rotate sort.
Memory Full Auto Scan
Restart
When memory becomes full while scanning originals, the machine can
make copies of scanned originals first, and then automatically proceed
scanning remaining originals.
Letterhead Setting If you select [Yes] in this function, the machine rotates images correctly.
Staple Position Specify which Top 2 staples or Bottom shown on the initial display with
priority.
Punch Type Specify which punch type (2 holes or 3 holes) has priority to be shown
on the initial display.
Simplified Screen:
Finishing Types
You can select which key is displayed with higher priority for “Finishing
Types” on the Simplified Screen.
Administrator Tools
Item Description
Menu Protect You can prevent unauthenticated users from changing the user tools.
5. Appendix
186
To Next Page
Loading...
Need help?
General