• To print a standard message that is not programmed as a default, program it in advance in “Program /
Change / Delete Standard Message” in the Facsimile Features menu. For details about the
programming method, see “Facsimile Features”, General Settings Guide.
• You can program one of the Quick Operation keys with operations for this function. Using the Quick
Operation key allows you to omit steps 2, 3, and 5. For details about Quick Operation Key, see
“Facsimile Features”, General Settings Guide.
Closed Network
Transmission will only take place if the destination's Closed Network Code is the same as yours.
This function can stop you accidentally sending information to the wrong place.
• You must program a Closed Network Code beforehand, using Program Closed Network Code under
Facsimile Features. For details about the programming method, see “Facsimile Features”, General
Settings Guide.
• This function is not available with Internet Fax, e-mail transmission, and folder transmission.
1. Place the original, and then select the scan settings you require.
2. Press [TX Mode].
3. Select [Option Setting].
2. Other Transmission Features
172
To Next Page
Loading...
Need help?
General