Specifying E-mail Destinations
This section explains how to specify e-mail destinations.
You can specify e-mail destinations by any of the following methods:
• Select the destination from the machine's address book
• Enter the e-mail address directly
• Search the LDAP server for the destination and select it
Before you select destinations, make sure you have selected [To]. If necessary, press [Cc] or [Bcc], and
then select destinations.
Selecting the Destination from the Machine's Address Book
This section explains how to select the destination from the machine's address book.
• To use this function, you must register the destinations in [System Settings] in advance. For details, see
"Registering Addresses and Users for Facsimile/Scanner Functions", General Settings Guide.
You can use the following methods to select destinations registered in the machine's address book:
• Select a destination from the list
• Select a destination by entering the registration number
• Select a destination by searching the machine's address book
Selecting a destination from the list
Select the destination from the destination list.
1. In the destination list, press the key including the destination name.
The key of the selected destination is highlighted, and the destination appears in the destination field
at the top of the screen.
1. Sending Scan Files by E-mail
28
To Next Page
Loading...
Need help?
General