3. Follow the instructions in Add Printer Wizard.
If the printer driver is on a CD-ROM, the location of the driver is \DRIVERS\(RPCS, PCL6, or PCL5E)
\XP_VISTA\(language)\DISK1. If the installer starts, click [Cancel] to quit.
4. Specify a port.
• Available ports vary according to your Windows operating system or the type of interface. For details,
see “Preparing the Machine”, Printer Reference.
Windows XP Home Edition
This section describes the procedure under Windows XP Home Edition.
1. On the [Start] menu, click [Control Panel].
2. Click [Printer and Other Hardware].
3. Click [Printers and Faxes].
4. Click [Add a Printer].
5. Follow the instructions in Add Printer Wizard.
If the printer driver is on a CD-ROM, the location of the driver is \DRIVERS\(RPCS, PCL6, or PCL5E)
\XP_VISTA\(language)\DISK1. If the installer starts, click [Cancel] to quit.
6. Specify a port.
• Available ports vary according to your Windows operating system or the type of interface. For details,
see “Preparing the Machine”, Printer Reference.
Windows Vista
This section describes the procedure under Windows Vista.
1. On the [Start] menu, click [Control Panel].
2. Click [Hardware and Sound].
3. Click [Printers].
4. Click [Add a printer].
5. Follow the instructions in Add Printer Wizard.
If the printer driver is on a CD-ROM, the location of the driver is \DRIVERS\(RPCS, PCL6, or PCL5E)
\XP_VISTA\(language)\DISK1. If the installer starts, click [Cancel] to quit.
6. Specify a port.
4. Troubleshooting When Using the Printer Function
56
To Next Page
Loading...
Need help?
General