• If you specified a tray for “Paper Tray” in the Facsimile Features menu, the paper loaded in the
specified tray is selected.
Page Separation and Length Reduction
If the size of a received document is longer than the paper loaded in the machine, each page of the
document can be split and printed on several sheets, or reduced and printed on a single sheet.
For example, this function splits the document if the document length is 20 mm (0.79 inch) or longer than
the paper used. The document is reduced if it is less than 20 mm (0.79 inch). When a document is split, an
asterisk ( ) is inserted at the split position and about 10 mm (0.39 inch) of the split area is duplicated on
the top of the second sheet.
• Your service representative can customize this function with the following settings:
• Reduction
• Print split mark
• Overprinting
• Overprinting length
Printing Options
203