• After you switch the main power on, a screen may appear to indicate that the machine is initializing.
Do not switch the power off during this process. Initialization takes about three minutes.
Turning On the Power
This section explains how to turn on the power.
1. Press the operation switch.
The operation switch indicator goes on.
• If the power does not come on when the operation switch is pressed, check the main power switch is
on. If it is off, turn it on.
• When the message "Functional problem within the machine. Press [Restart] after the current process.
Make the settings again after the machine has restarted." is displayed, follow the instructions and
press [Restart] at the bottom right-hand corner of the screen after the process is completed.
Turning Off the Power
This section explains how to turn off the power.
1. Make sure the exposure glass cover or the ADF is in the right position.
2. Press the operation switch.
The operation switch indicator goes off.
Turning On/Off the Power
43
To Next Page
Loading...
Need help?
General