4. Press the [Start] key.
• To check the contents of Destination keys, print the destination list using Print Address Book: Destination
List under System Settings. For details about the printing method, see “System Settings”, General
Settings Guide.
Switching the type of title in the Address Book
There are three types of titles for destination lists; “Title 1”, “Title 2”, and “Title 3”.
1. Press [Change Title].
2. Select the type of the title, and then press [OK].
Specifying Group Destinations
If you program multiple destinations into a group, you can send documents to all destinations in that group
using just a few keystrokes.
Destinations programmed in a group are indicated by a group icon .
• In the destination list, program groups in advance. For details about programming destinations, see
“Registering Addresses and Users for Facsimile/Scanner Functions”, General Settings Guide.
• Group destination can be used only for Memory Transmission; it cannot be used for Immediate
Transmission. The machine automatically changes to Memory Transmission when you use group
destination.
• The total number of destinations programmed in multiple groups should not exceed the maximum
number of destinations you can specify per file, see “Maximum Values”.
1. Press the transmission type tab to switch the transmission type to fax/IP-Fax, Internet Fax,
e-mail, or folder.
2. Press the Destination key programmed with the desired group.
1. Transmission
100
To Next Page
Loading...
Need help?
General