• To specify SEP Codes in “Adv.Features”, see “Setting SEP Codes for Reception”.
• To register SEP Codes in the Address Book, see “Registering Addresses and Users for Facsimile/
Scanner Functions”, General Settings Guide.
• To register SEP Codes in Keystroke Programs, see “Registering and Changing Keystroke
Programs”.
• You can program one of the Quick Operation keys with operations for this function. Using the Quick
Operation key allows you to omit steps 1, 2, and 4. For details about Quick Operation Key, see
“Facsimile Features”, General Settings Guide.
• p.137 "Setting SEP Codes for Reception"
• p.304 "Registering and Changing Keystroke Programs"
Fax Header Print
When the Fax Header is set to on, the stored name is printed on the receiver's paper.
You can store two Fax Headers; “First Name” and “Second Name”.
For example, if you store your department name in one and your organization name in the other, you could
use the first when sending internal faxes and the second for external faxes.
• In the USA, the Fax Header must contain the telephone number of the line your machine is connected
to. It will be printed on the header of every page you send. Required in the USA.
1. Place the original, and then select the scan settings you require.
2. Press [TX Mode].
3. Select [Option Setting].
2. Other Transmission Features
176
To Next Page
Loading...
Need help?
General