4. Make sure that [Fax Header Print] is highlighted.
5. Press [OK] twice.
6. Specify the destination, and then press the [Start] key.
• You can program fax header names using the Program Fax Information function in the Facsimile
Features menu. For details about the programming method, see “Facsimile Features”, General Settings
Guide.
• You can select whether or not dates, fax header names, file numbers, or page numbers are printed
by changing their respective User Parameters (switch 18, bit 3, 2, 1, 0) in the Facsimile Features
menu. See “Facsimile Features”, General Settings Guide.
• If you used the number keys to specify the receiver, the first header name is printed on the receiver's
paper. To print the second header name, contact your service representative.
• You can program one of the Quick Operation keys with operations for this function. Using the Quick
Operation key allows you to omit steps 2, 3, and 5. For details about Quick Operation Key, see
“Facsimile Features”, General Settings Guide.
• In the USA, law requires that your fax number be included in the Fax Header. Register the fax number
and switch on Fax Header Print with User Parameter (switch 18, bit 1) in the Facsimile Features menu.
See “Facsimile Features”, General Settings Guide.
Transmission Options
177
To Next Page
Loading...
