• JBIG Transmission
• ECM (Error Correction Mode)
Functions Not Available for Folder Transmission
This section tells you which functions are not available for folder transmission.
The following functions are available for standard fax transmission, but not for folder transmission:
• Immediate Transmission
• Closed Network Transmission
• SUB Code Transmission
• On Hook Dial
• Manual Dial
• JBIG Transmission
• ECM (Error Correction Mode)
• Selecting destinations from recent destinations
• Simultaneous Broadcast using multiple line ports
• Directly entering destinations
E-mail Encryption
For security, this machine can apply encryption and/or digital signatures to the e-mail it receives for
forwarding and routing.
Use of encryption and/or digital signatures helps prevent e-mail spoofing and information leakage.
Encryption and digital signatures can be used with the following functions:
• Routing documents to addresses registered in Personal Boxes.
• Transferring documents to addresses registered in Transfer Boxes.
• E-mail forwarding
• Routing e-mail received via SMTP
• First register the forwarding/routing destinations' e-mail addresses in the Address Book, and then
specify the encryption settings in both Address Book and Web Image Monitor for each destination
that you want to send encrypted e-mail to. For details about these settings, ask your administrator.
• E-mail encryption and digital signatures are not available with standard transmission to e-mail
destinations. Encryption is only available for forwarding, routing, or transferring to e-mail destinations.
1. Transmission
42
To Next Page
Loading...
