10. Press [Fax Dest.].
11. Press [Change] under “Fax Destination”.
12. Enter the new fax number using the number keys, and then press [OK].
13. Change the settings of “Select Line”, “Adv. Features”, “Fax Header”, and “Label
Insertion”, as necessary.
14. Press [OK].
15. Press [Exit].
16. Press the [User Tools/Counter] key.
• For details about the procedure in step 13, see “Registering Addresses and Users for Facsimile/
Scanner Functions”, General Settings Guide.
Deleting a Fax Destination
This section explains how to delete destination information from the Address Book.
Programming Destinations in the Address Book
107
To Next Page
Loading...
