1. Press [Special Original].
2. Select [Batch] and then press [OK].
3. Place the first part of the original, and then press the [Start] key.
4. After the first part of the original has been fed, place the next part, then press the [Start]
key.
• When [SADF] is displayed instead of [Batch], specify the Batch mode under Switch to Batch in User
Tools. For details about Switch to Batch, see “Copier/Document Server Features”, General Settings
Guide.
• To copy subsequent originals in this mode, repeat step 4.
• When the Sort, Combine or 1 Sided 2 Sided function has been set, press the [ ] key after all
originals have been scanned.
SADF Mode
In SADF mode, even when an original is placed page by page in the ADF, each page is automatically fed
when placed.
1. Press [Special Original].
2. Press [SADF] and then press [OK].
Placing Originals
27
To Next Page
Loading...
Need help?
General