Basic Operations When Using Scan to Folder
This section describes the basic operations involved in using Scan to Folder.
1. Make sure that no previous settings remain.
If a previous setting remains, press the [Clear Modes] key.
2. If the network delivery scanner screen or E-mail screen appears, switch to the Scan to Folder
screen.
For details, see "Switching to the Scan to Folder Screen".
3. Place originals.
4. If necessary, press [Scan Settings] to specify scanner settings such as resolution and scan
size.
For details, see "Various Scan Settings".
5. If necessary, specify the scanning density.
For details, see "Adjusting Image Density".
6. If necessary, press [Original Feed Type] to specify settings such as original orientation.
For details, see "Setting of Original Feed Type".
7. If necessary, press [Send File Type / Name] to specify settings such as file format and file
name.
For details, see "Specifying the File Type and File Name".
Basic Operations When Using Scan to Folder
57
To Next Page
Loading...
