• When the Panel Key Sound is turned off, it will not sound if you insert paper into the bypass tray. For
details about Panel Key Sound, see “System Settings”, General Settings Guide.
• Printing on special paper such as OHP transparencies and thick paper may be slower than printing
on plain paper.
• Depending on the environment where the machine is being used, you might at times hear a rustling
noise from paper moving through the machine. This noise does not indicate a malfunction.
• For standard paper sizes that can be used with the bypass tray, see “Supplementary Information”.
• p.84 "Registering the Initial Display's Default Functions"
• p.171 "Supplementary Information"
Copying onto Regular Size Paper
Makes copies onto regular size paper from the bypass tray.
1. Open the bypass tray, and then insert the paper face-down until you hear the beep.
2. Align the paper guides to the paper size by pinching the clip.
3. Press [Bypass], and then press the [ ] key.
4. Press [Select Size].
5. Select the paper size.
Copying from the Bypass Tray
39
To Next Page
Loading...
Need help?
General