1. Press [Manual Entry].
The soft keyboard appears.
2. Enter the e-mail address.
3. Press [OK].
• Depending on the security settings, [Manual Entry] may not be displayed.
• To change a registered destination e-mail address, press [Edit] to the left of the destination field
to display the soft keyboard, use the soft keyboard to enter the new address, and then click [OK].
• The e-mail address that is entered directly can be registered in the machine's address book. For
details, see "Registering a Directly-Entered Destination in the Address Book".
• p.35 "Registering a Directly-Entered Destination in the Address Book"
Selecting Destinations by Searching an LDAP Server
This section explains how to search for an address registered in an LDAP server and specify it as an e-mail
destination.
• To use this function, an LDAP server must be connected to the network.
• Under [System Settings], the LDAP server must be registered and [LDAP Search] must be set to [On].
For details, see "System Settings", General Settings Guide.
1. Sending Scan Files by E-mail
32
To Next Page
Loading...
Need help?
General