7. Press the [ ] key.
The machine dials the destination and starts transmission.
Parallel Memory Transmission
This function dials while the original is being scanned.
Standard Memory Transmission stores the original in memory, then dials the destination. However, Parallel
Memory Transmission allows you to confirm the connection status quickly. In addition, this function scans
the original faster than Immediate Transmission. This is useful when you are in a hurry and need to use the
original for another purpose.
• Standard Memory Transmission is used instead of Parallel Memory Transmission in the following
cases:
• When the line is busy and could not be connected to
• With Send Later
• When you store an original for Memory Transmission while another communication is in progress
• When two or more destinations are specified
• When an original is placed on the exposure glass, and then sent
• When you send documents stored in the Document Server
• You can turn this function on or off with the User Parameter (switch 07, bit 2) in the Facsimile Features
menu. See “Facsimile Features”, General Settings Guide.
• Standard Memory Transmission may be used instead of Parallel Memory Transmission depending
on the optional equipment installed if there is not enough free memory left.
• If you use this function, the Memory Storage Report will not be printed.
• If the [Clear/Stop] key is pressed, the original jams or memory runs out, Parallel Memory Transmission
will stop. The Communication Result Report is printed and files are deleted.
• When using Parallel Memory Transmission, only the page number is printed on the header of the fax,
the total number of originals is not automatically printed.
Automatic Redial
If a fax document could not be sent because the line was busy or an error occurred during transmission,
the line is switched to another at five-minute intervals and redial is attempted up to five times.
If redialing fails after four redials, the machine cancels the transmission and prints a Communication Result
Report or Communication Failure Report.
Transmission Modes
25
To Next Page
Loading...
Need help?
General