• If the combined total number of programmed destinations exceeds the maximum value, only
Immediate Transmission is possible.
• For the maximum values of the following items, see “Maximum Values”.
• Number of documents you can store in memory for Memory Transmission
• Number of pages you can store in memory (using A4 Standard <ITU-T 1 Chart>)
• Number of destinations you can specify per file
• Number of destinations you can specify for all files (including files in memory)
• p.59 "Scan Settings"
• p.77 "Specifying a Destination"
• p.316 "Maximum Values"
Sending originals using the exposure glass (Memory Transmission)
This section explains how to send originals by Memory Transmission using the exposure glass.
1. Make sure [Immed. TX] is not highlighted.
2. Place the first page of the original face down on the exposure glass.
3. Specify a destination.
4. Make the scan settings you require.
5. Press the [Start] key.
The machine starts scanning.
6. Place the next original on the exposure glass within 60 seconds when you send multiple
originals, and then repeat steps 4 and 5.
Repeat this step for each page.
1. Transmission
24
To Next Page
Loading...
Need help?
General