1. Press [Sender Name].
2. Press [Registration No.].
3. Using the number keys, enter the three-digit registration number assigned to the required
destination folder.
If the entered number is less than five digits, press the [ ] key after the last number.
Example: To enter 006
Press the [6] key, and then press the [ ] key.
By pressing [Change], you can change the selected destination.
4. Press [OK] twice.
Selecting a Sender by Searching the Delivery Server's Destination List
This section explains how to select a sender by searching the delivery server's Destination List.
Specifying the Sender
109
To Next Page
Loading...
Need help?
General