Moving.................................................................133
Multi-accessing......................................................18
N
Names of major options.........................................6
Network connection..............................................71
Network delivery function cannot be used.........84
O
Operations are not possible when messages are
displayed...............................................................85
Optimum environmental conditions...................134
Orientation-fixed paper or two-sided paper...........
..............................................................................100
Other printing problems........................................73
P
Panel tone.................................................................8
Paper......................................................................97
Power connection................................................135
Printer function.......................................................59
Printing....................................................................46
Problems operating the machine..........................14
R
Reception...............................................................46
Removing jammed paper..........................117, 119
Removing jammed staples..................................127
Removing punch waste.......................................131
Removing toner...................................................107
Replacing the stamp cartridge...........................114
Report.....................................................................61
S
Scanner function....................................................86
Scanning is not done as expected.......................81
Sending faxes or scanned documents when toner
has run out...........................................................108
Server-Generated error e-mail............................54
Stamp.....................................................................27
Stamp cartridge...................................................114
Staples..................................................................110
Status messages.....................................................59
Stored files cannot be accessed...........................83
Stored files cannot be edited................................84
Symbols....................................................................6
T
Toner....................................................................106
Transmission...........................................................46
Transmission/Reception.......................................46
Tray 3 (LCT)...........................................................98
Turning off the main power / In the event of power
failure......................................................................53
TWAIN...................................................................92
TWAIN driver cannot be started..........................83
U
Used toner...........................................................109
W
When A is displayed...........................................119
When an indicator to the right of a function key is lit
................................................................................12
When B is displayed...........................................119
When C is displayed..........................................120
When D is displayed..........................................120
When memory is full..............................................51
When P is displayed...........................................121
When paper is not fed properly...........................73
When R1 - R4 is displayed in the case of 3000-
sheet finisher........................................................122
When R1 - R4 is displayed in the case of booklet
finisher..................................................................124
When R1 - R5 is displayed in the case of 1000-
sheet finisher........................................................122
When R5 - R7 is displayed in the case of 3000-
sheet finisher........................................................123
When R5 - R7 is displayed in the case of booklet
finisher..................................................................124
When R8 - R12 is displayed in the case of booklet
finisher..................................................................125
When S/MIME cannot be used..........................84
When the data in indicator does not light up or flash
................................................................................71
When the machine is connected to the computer
using the interface cable.......................................71
When U is displayed..........................................125
When Y is displayed...........................................126
When Y is displayed in the case of Large Capacity
Tray (LCT).............................................................126
When you cannot print clearly.............................73
140