Basic Operation for Sending Scan Files by E-mail
This section describes the basic operation for sending scan files by e-mail.
1. Make sure that no previous settings remain.
If a previous setting remains, press the [Clear Modes] key.
2. If the network delivery scanner screen or Scan to Folder screen appears, switch to the E-
mail screen.
For details, see "Switching to the E-mail Screen".
3. Place originals.
4. If necessary, press [Scan Settings] to specify scanner settings such as resolution and scan
size.
For details, see "Various Scan Settings".
5. If necessary, specify the scanning density.
For details, see "Adjusting Image Density".
6. If necessary, press [Original Feed Type] to specify settings such as original orientation.
For details, see "Setting of Original Feed Type".
7. If necessary, press [Send File Type / Name] to specify settings such as file format and file
name.
For details, see "Specifying the File Type and File Name".
1. Sending Scan Files by E-mail
24
To Next Page
Loading...
Need help?
General