Setting LAN-Fax Driver Properties
This section explains how to set properties required for using the LAN-Fax Driver.
• If your operating system is Windows 2000/XP/Vista or Windows Server 2003/2003 R2, log on
using an account that has Administrator rights.
Setting print properties
This section explains how to make settings such as paper size or resolution.
1. On the [Start] menu, select [Control Panel]. Then select [Printers and Other Hardware], and
then [Printers and Faxes].
In Windows 2000, point to [Settings] on the [Start] menu, and then click [Printers].
In Windows XP Professional or Windows Server 2003/2003 R2, select [Printers and Faxes] on the
[Start] menu.
In Windows Vista, select [Control Panel] on the [Start] menu. Then select [Hardware and Sound], and
then [Printers].
2. Select to highlight [LAN-Fax M8], then click [Properties] on the [File] menu.
3. Click [Printing Preferences...] to set the following properties.
• Paper Size
• Orientation
• Tray
• Resolution
4. Click [OK].
Making settings for option configuration
Make settings for optional units installed in this machine.
1. On the [Start] menu, select [Control Panel]. Then select [Printers and Other Hardware], and
then [Printers and Faxes].
In Windows 2000, point to [Settings] on the [Start] menu, and then click [Printers].
In Windows XP Professional or Windows Server 2003/2003 R2, select [Printers and Faxes] on the
[Start] menu.
In Windows Vista, select [Control Panel] on the [Start] menu. Then select [Hardware and Sound], and
then [Printers].
2. Select to highlight [LAN-Fax M8], then click [Properties] on the [File] menu.
Sending Fax Documents from Computers
281
To Next Page
Loading...
Need help?
General