1. Press [Dup./Combine/Series].
2. Press [Series].
3. Select [2 Sided 1 Sided] or [Book 1 Sided], and then press [OK].
If you specified [2 Sided 1 Sided], you can specify the orientation.
• Press the [ ] key after all originals have been scanned.
• p.51 "Originals and copy orientation"
Booklet/Magazine
Copies two or more originals in page order.
• You cannot use the bypass tray with this function.
The following table shows the paper sizes for Book 2 Sided when the reproduction ratio is 100%:
3. Advanced Copying
132
To Next Page
Loading...
