Scanning Two-Sided Originals
Use this function to send two-sided originals.
The front and back of the scanned original will be printed in order on separate sheets at the other end. The
orientation of alternate sheets may be reversed at the other end. If you want to print the original with the
same orientation at the other end, specify the “Original position” and “Page opening orientation”.
• To use this function, the optional ADF is required. When you use [2 Sided Original] under [Original
Feed Type], the originals cannot be sent by using just the exposure glass.
• Two-sided originals are only sent with Memory Transmission. Immediate Transmission is not possible.
1. Place the original, and then select the scan settings you require.
Placing Originals
47
To Next Page
Loading...
