• Even if you press the operation switch, the operation switch indicator does not go out, but blinks in
the following cases:
• When the exposure glass cover or the ADF is open.
• During communication with external equipment.
• When the hard disk is active.
• When the internal cooling fan is active.
• If a file is waiting to be transmitted within the next minute using the “Send Later” facsimile function.
Turning Off the Main Power
This section explains how to turn off the main power.
• Do not turn off the main power switch when the operation switch indicator is lit or blinking. Doing so
may result in damage to the hard disk or memory.
• Make sure to turn off the main power switch before pulling out the power plug. Not doing so may
result in damage to the hard disk or memory.
1. Make sure the operation switch indicator is not lit.
2. Open the switch cover, and then turn off the main power switch.
The main power indicator goes out.
• When the main power switch is turned off while using the fax function, waiting fax and print jobs may
be cancelled, and incoming fax documents not received. If you have to turn off this switch for some
reason, make sure 100% is shown as available memory on the screen before turning off the main
power switch or unplugging the power cord. Fax files in memory are deleted an hour after you turn
off the main power switch or unplug the power cord.
• For details, see “Turning Off the Main Power / In the Event of Power Failure”, Troubleshooting.
1. Getting Started
44
To Next Page
Loading...
Need help?
General