Checking Machine Status and Settings
You can check the machine's system status.
Maintenance Info
You can check the following items under [Maintenance Info]:
• [Remaining Toner]
Displays the amount of remaining toner.
• [No Staples]
Displays whether there are staples remaining or not.
• [Punch Receptacle Full]
Displays whether the hole punch receptacle is full.
• [Paper Tray]
Displays the paper type and size loaded in the paper tray.
• [Output Tray Full]
Displays whether the output tray is overloaded.
• [Original Misfeed]
Displays state of and solutions for original misfeeds.
• [Paper Misfeed]
Displays state of and solutions for paper jams.
• [Cover Open]
Indicates whether front cover, duplex unit, etc., is open.
Data Storage
You can check the following items under [Data Storage]:
• [HDD Remaining Memory]
Displays the amount of available hard disk drive memory.
• [HDD File(s)]
Displays the total number of jobs stored in the hard disk drive.
• [Print Job(s)]
Displays the number of jobs for “Hold Print”, “Stored Print”, “Locked Print”, and “Sample Print”.
• [Fax TX / RX File(s)]
Displays the number of “Transmission Standby File(s)”, “Memory Lock File(s)”, “RX Print Standby
File(s)”, and other files stored in the hard disk drive.
• [Memory Erase Status]
Checking Machine Status and Settings
9
To Next Page
Loading...
Need help?
General