3. Press [OK].
The standby display appears.
• When you install the extra G3 interface unit, you can specify the line port home position. See “Setting
Transmission Function Defaults”.
• When sending a fax, you can select the line port if dialing with the number keys.
• A maximum of three simultaneous communications are possible. You cannot perform three Immediate
Transmissions simultaneously.
• If three communications are in progress, the display shows the first communication that was initiated.
• p.152 "Setting Transmission Function Defaults"
Simultaneous Broadcast Using Multiple Line Ports
The standard broadcast function sends faxes one at a time to multiple destinations in the order of specified
destinations. However, the Simultaneous Broadcast function can simultaneously send faxes to multiple
destinations using different lines.
This results in a shorter overall transmission time.
• The optional extra G3 interface unit is required.
Changing the Line Port
75
To Next Page
Loading...
