Setting Transmission Function Defaults
You can specify the default values of document transmission function settings.
“Default” refers to the value of a setting on the initial display when the machine is first turned on or when
modes are cleared.
The following procedure allows you to specify the default values only of settings that can be changed from
the initial display.
You can specify default values for the following settings:
Memory Transmission/Immediate Transmission, transmission type, Scan Type, Resolution, Scan Size,
Mixed Original Sizes, Auto Density, Manual Density, Original Orientation, Original Settings, Stamp, Select
Line, Send Later, Reception Notice, BCC Transmission, E-mail TX Results, Text, Standard Message, Auto
Reduce, Label Insertion, Closed Network, SUB Code Transmission, SEP Code Reception, Fax Header Print,
TX Status Report, Store File, File Type, Preview before transmission
1. On the initial display, configure a setting with the default value you want to specify.
2. Press the [Program] key.
3. Press [Program as Defaults].
4. Press [Program].
5. When a confirmation message appears, press [Yes].
The value currently specified for the setting becomes the default.
1. Transmission
152
To Next Page
Loading...
Need help?
General