• p.109 "Registering Entered Destinations to the Address Book"
• p.316 "Maximum Values"
Regarding IP-Fax destinations
The IP-Fax destination details that you must specify vary depending on the machine's configuration and
the configuration of the network to which it is connected.
Depending on this machine's configuration, specify the IP-Fax destination as follows:
When not using a gatekeeper/SIP server
• From IP-Fax to IP-Fax
Specify the IP address or host name of the receiving machine.
Example: 192.168.1.10 (IP address)
Example: IPFAX1 (host name)
• From IP-Fax to G3 fax
Specify the G3 fax telephone number of the receiving machine.
Example: 0312345678
When using a gatekeeper server
• From IP-Fax to IP-Fax
Specify the alias telephone number of the receiving machine.
Example: 0311119999 (alias telephone number)
• From IP-Fax to G3 fax
Specify the G3 fax telephone number of the receiving machine.
Example: 0312345678
When using a SIP server
• From IP-Fax to IP-Fax
Specify the SIP user name of the receiving machine.
Example: ABC (SIP user name)
• From IP-Fax to G3 fax
Specify the G3 fax telephone number of the receiving machine.
Example: 0312345678
• To send to a G3 fax via a gateway connected to a public telephone line, you must specify it's the
receiver's machine telephone number. For example, if the receiver's fax number is “0312345678”,
specify “5678”. To send from an IP-Fax to G3 fax without using gatekeeper or SIP server, you must
register the gateway also.
1. Transmission
84
To Next Page
Loading...
Need help?
General