5. Specify the next destination.
To add another destination, repeat steps 4 and 5.
Press the transmission type tab to switch the transmission type between fax/IP-Fax, Internet Fax, e-
mail, and folder.
6. Press the [Start] key.
The machine starts to scan the original and stores it in memory. When scanning ends, the
Communicating indicator lights and transmission starts.
• Depending on the security settings, [Manual Entry] might not appear and you might not be able to
enter the IP-Fax destination.
• To select a destination from the Address Book, see “Using the Address Book to Specify Destinations”.
• For a list of gateways (T.38-compliant), gatekeepers, or SIP servers that are certified as operable with
this machine, contact your local retail or service representative.
• Methods of entering a destination vary depending on the network settings made by the administrator.
Ask the machine administrator for details. For details about entering the IP-Fax destination, see
“Regarding IP-Fax destinations”.
• For details about text entry, see “Entering Text”, About This Machine.
• The Facsimile Features menu includes a user parameter setting (switch 17, bit 2) that enables you to
configure the machine to force the user to press [Add] whenever s/he specifies a destination using a
destination key. This prevents users accidentally sending documents to the wrong destination. See
“Facsimile Features”, General Settings Guide.
• If you press [Prg. Dest.], you can register an entered destination in the destination list. For details about
storing a destination you entered, see “Registering Entered Destinations to the Address Book”.
• For the maximum number of digits that can be included in a destination, see “Maximum Values”.
• p.73 "Changing the Line Port"
• p.84 "Regarding IP-Fax destinations"
• p.99 "Using the Address Book to Specify Destinations"
Specifying a Destination
83
To Next Page
Loading...
Need help?
General