2. Other Transmission Features
This section explains functions you can apply using the [TX Mode] setting, such as Sending at a Specific
Time (Send Later) and Label Insertion. TX Mode allows you to use various functions with transmissions.
Sending at a Specific Time (Send Later)
Using this function, you can instruct the machine to delay transmission of your fax document until a specified
later time.
This allows you to take advantage of off-peak telephone charges without having to be by the machine at
the time.
• If the machine is switched off for about one hour, all fax documents stored in memory are lost. If
documents are lost for this reason, a Power Failure Report is automatically printed when the operation
switch is turned on. Use this report to check the list of lost documents. See “Turning Off the Main
Power / In the Event of Power Failure”, Troubleshooting.
• This function is unavailable with Immediate Transmission. Use Memory Transmission.
1. Place the original, and then select the scan settings you require.
2. Press [TX Mode].
3. Press [Send Later].
155
To Next Page
Loading...
Need help?
General