1. If [Auto Density] is selected, press [Auto Density] to cancel it.
2. Press [ ] or [ ] to adjust the image density. The density indicator “ ” moves.
Combined Auto and Manual Image Density
Adjusts the density of an image only for dark texture originals.
1. Make sure [Auto Density] is selected.
If [Auto Density] is not selected, press [Auto Density].
2. Press [ ] or [ ] to adjust the density. The density indicator “ ” moves.
Copy Quality
Adjusts image qualities.
The following three types of image adjustments are available:
Sharp / Soft
Adjusts the outline of an image.
Contrast
Adjusts the shades of an image.
3. Advanced Copying
88
To Next Page
Loading...
