Specifications for the Main Unit
This section describes specifications for the main unit.
Configuration:
Desktop
Photosensitivity type:
OPC drum
Original scanning:
One-dimensional solid scanning system through CCD
Copy process:
Dry electrostatic transfer system
Development:
Dry two-component magnetic brush development system
Fusing:
Heating roll pressure system
Resolution:
• Scanning originals: 600 dpi
• Printing: 600 dpi
Exposure glass:
Stationary original exposure type
Original reference position:
Rear left corner
Warm-up time (23°C, rated voltage):
• Main power switch: 18 seconds or less
• Operation switch:
• Type 1: 10 seconds or less
• Type 2: 15 seconds or less
Originals:
Sheet/book/objects
Maximum original size:
A3 , 11 × 17
Paper size:
• Trays: A3 - A5 , 11 × 17 - 7
1
/
4
× 10
1
/
2
4. Appendix
64
To Next Page
Loading...
