3. Specify a destination.
4. Make the scan settings you require.
5. Press the [Start] key.
The machine dials the destination.
6. Place the next original on the exposure glass within 10 seconds when you send multiple
originals, and then repeat steps 4 and 5.
Repeat this step for each page.
7. Press the [ ] key.
Displaying Confirmation of Transmission
On this screen you can check the destination, transmission mode, and other transmission settings before
transmission.
1. Press [Check Modes], and then check the transmission settings.
The following display appears.
Transmission Modes
29
To Next Page
Loading...
