• Using DeskTopBinder, you can edit and print scan files. For more information about
DeskTopBinder, see DeskTopBinder manuals.
• The model name of the connected scanner appears in the title bar of the Scanner Control dialog
box. If there is more than one scanner of the same model on the network, make sure you have
selected the correct scanner. If you have not, click [Select Scanner Driver...], and then select the
scanner again. If the correct scanner does not appear in the list, check that the scanner is correctly
connected to the network and that its IPv4 address has been specified. If the correct scanner still
does not appear, consult the network administrator.
5. Scanning Originals with the Network TWAIN Scanner
120
To Next Page
Loading...
Need help?
General