• If, under [Scanner Features], [Set Wait Time] is set for [Wait Time for Next Orig.: Exposure Glass]
or [Wait Time for Next Original(s): SADF], place additional originals within the specified time.
When the countdown ends, transmission or storage starts automatically. To start transmission or
storage before the countdown is completed, press the [ ] key. Countdown is canceled if Scan
Settings or other settings are changed in the meantime. Place additional originals, and then press
the [Start] key. The machine scans the originals and the countdown is resumed. For details about
[Wait Time for Next Orig.: Exposure Glass] and [Wait Time for Next Original(s): SADF], see
"Scanner Features", General Settings Guide.
• If [SADF] is selected, scanning from the exposure glass is enabled after scanning from the ADF.
If this happens, you must press the [Start] key to start scanning.
• p.141 "Specifying the File Type"
• p.136 "Batch, SADF"
6. Various Scan Settings
140
To Next Page
Loading...
