*1
Simultaneous operations are only possible after the preceding job documents are all scanned and [New Job]
appears.
*2
You can scan a document after the preceding job documents are all scanned.
*3
Operation is possible when extra lines are added.
*4
During stapling, printing automatically starts after the current job.
*5
Stapling is not available.
*6
Simultaneous operation becomes possible after you press [New Job].
*7
During parallel reception, any subsequent job is suspended until the reception is completed.
• Stapling cannot be used at the same time for multiple functions.
When a Job Is Not Performed
19
To Next Page
Loading...
Need help?
General